正版
大型卷铁心节能牵引变压器理论建模与制造工艺:LARGE ENERGY-SAVING WOUND CORE TRACTION TRANSFORMER — THEORETICAL MODELING AND
- 书名
- 大型卷铁心节能牵引变压器理论建模与制造工艺:LARGE ENERGY-SAVING WOUND CORE TRACTION TRANSFORMER — THEORETICAL MODELING AND
- 作者
- 高仕斌,周利军,张陈擎宇 著
- 出版社
- 西南交通大学出版社
- 出版时间
- 2024-12-01
- ISBN
- 9787577402154
- 货号
- 1203581343
- 品相
- 全新
- 分类
- 当代·工业
- 书名
- 大型卷铁心节能牵引变压器理论建模与制造工艺:LARGE ENERGY-SAVING WOUND CORE TRACTION TRANSFORMER — THEORETICAL MODELING AND
- 作者
- 高仕斌,周利军,张陈擎宇 著
- 出版社
- 西南交通大学出版社
- 出版时间
- 2024-12-01
- ISBN
- 9787577402154
- 货号
- 1203581343
- 品相
- 全新
- 分类
- 当代·工业
目录▼
1 Introduction
1.1 Introduction to Traction Power Supply System
1.2 Overview of Energy-Saving Wound Core Traction Transformer
1.3 Theoretical and Technical Challenges Faced by/Large-Capacity Wound Core Traction Transformers
1.3.1 Theoretical Challenges
1.3.2 Technical Challenges
2 Modeling and Loss Calculation for Eddy Current Field of Wound Cores in Traction Transformers
2.1 The Method for Analyzing and Calculating Eddy Current Losses in Multi-Layer Stepwise Gradient Silicon Steel Sheets
2.1.1 Analytical Calculation of Two-Dimensional Rectangular Domain Eddy Current Field
2.1.2 Single-Layer Trapezoidal Silicon Steel Sheet: Loss Calculation and Simulation Analysis
2.1.3 Calculation of Eddy Current Losses in Multi-Layer Continuous Trapezoidal Silicon Steel Sheets
2.1.4 Conclusion
2.2 Homogenized Eddy Current Field Analysis Model for Wound Core Electromagnetic Anisotropy
2.2.1 Coordinate Standardization of Electromagnetic Characteristic Parameters
2.2.2 Solution for Transverse Parameters of the Equivalent Conductivity Matrix
2.2.3 Solution for Normal Parameters of Equivalent Magnetic Permeability Matrix
2.2.4 Finite Element Analysis and Loss Calculation of Eddy Current Field
2.2.5 Model Validation and Test Analysis
2.3 Summary
2.4 Calculation Method for Eddy Current Losses in Wound Cores for Practical Engineering
2.4.1 Analytical Calculation of Eddy Current Losses Under Magnetic Flux Classification Constraint
2.4.2 Analytical Calculation of Eddy Current Losses Under Nonlinear Magnetic Characteristics
2.4.3 Loss Coupling Model Considering Heterogeneous Magnetic Boundary Values and Nonlinear Magnetic Characteristics
2.5 Summary
3 Wound Core Traction Transformer Winding: Modeling and Calculation of Distributed Parameters
3.1 N-Order Ladder Network Circuit Model
3.2 Calculation of Distributed Inductance Parameters
3.3 Calculation of Distributed Capacitance Parameters
3.3.1 Effective Permittivity of Medium
3.3.2 Longitudinal Equivalent Capacitance Parameters
3.3.3 Capacitance to Ground Parameters
3.3.4 Inter-winding Capacitance Parameters
3.4 Calculation of Distributed Resistance Parameters
3.5 State-Space Equation Modeling
3.6 Model Verification and Optimization
4 Temperature Rise Modeling and Thermal Performance Analysis of Wound Core Traction Transformers
4.1 Analysis on Heat Transfer Process in Wound Core Traction Transformers
4.1.1 Heat Dissipation Modes of Wound Core Traction Transformers
4.1.2 Fluid Flow Patterns
4.1.3 Theory of Natural Oil Circulation
4.2 Simulation Modeling and Testing Verification of Computational Fluid Dynamics
4.2.1 Temperature Rise Test of Traction Transformers
4.2.2 Computational Fluid Dynamics Model of Temperature Rise in Traction Transformers
4.3 Research on Temperature Field and Oil Flow Field of Wound Core Traction Transformer
4.3.1 Research on Temperature Field and Oil Flow Field of Steady-State Wound Core Traction Transformer
4.3.2 Research on Temperature Field and Oil Flow Field of Wound Core Traction Transformer Under Step Loads
……
5 Design and Manufacturing Technology of Wound Core Transformers
6 Fault Diagnosis Methods for Large Wound Core Traction Transformers
7 Testing and Application of QYS-R-(31500+25000)/220 Wound Core Traction Transformer
Appendix A: Calculation Process of Main Insulation Check
Appendix B: Calculation Process of Disc Mechanical Strength
References
文摘▼
本书中文版为2023年度国家出版基金资助项目,英文版为施普林格版权输出项目。本书围绕大型卷铁心节能牵引变压器“设计—制造—试验”的理论与技术开展研究,解决了其“低损耗设计”“高性能制造”“针对性试验”三大难题:(1)构建了连续卷绕铁心涡流损耗计算方法,开发了“铁心-绕组-支撑结构”全方位匹配的低损耗电磁设计技术,提出了梯级渐变卷铁心与组合式绕组的电磁力解析方法及“损耗-噪声-绝缘-温升”协同最优的大型卷铁心变压器磁路对称的结构型式,实现了变压器损耗和温升的高效、精准计算;(2)研发了大型铁心“无偏”卷绕、封闭铁心上大型绕组连续绕制的工艺控制技术和专用工艺装备,解决了高电压等级卷铁心变压器生产过程中铁心卷绕、退火、变压器拼装移动等问题,突破了大型卷铁心低损耗、低噪声、低故障率的关键技术;(3)提出了损耗、温升、冲击短路等针对性试验方法,实现了大型卷铁心变压器的性能考核,保障了大型卷铁心节能变压器的制造与运行品质。





